Publications: Meso- and Micromechanics

Publications
 

2022

Goetz, A.; Durmaz, A.R.; Müller, M.; Thomas, A.; Britz, D.; Kerfriden, P.; Eberl, C., Addressing materials’ microstructure diversity using transfer learning, npj Computational Materials 8/1 (2022) Art. 27; 13 pp. Link

Durmaz, A.R.; Natkowski, E.; Arnaudov, N.; Sonnweber-Ribic, P.; Weihe, S.; Münstermann, S.; Eberl, C.; Gumbsch, P., Micromechanical fatigue experiments for validation of microstructure-sensitive fatigue simulation models, International Journal of Fatigue 160 (2022) Art. 106824, 17 pp. Link

Koss, P.A.; Durmaz, A.R.; Blug, A.; Laskin, G.; Pawar, O.S.; Thiemann, K.; Bertz, A.; Straub, T.; Elsässer, C., Optically pumped magnetometer measuring fatigue-induced damage in steel, Applied Sciences 12/3 (2022) Art. 1329, 11 pp. Link

Singh, S.P.; Rijal, A.; Straub, T.; Han, J.-K.; Kennerknecht, T.; Eberl, C.; Kawasaki, M.; Kumar, P., Effect of high-pressure torsion on high cycle fatigue of commercially pure Cu: Some insights from formation of surface micro-cracks, Materials Characterization 190 (2022) Art. 112059, 8 pp. Link

to top

2021

Alam, M.; Birkholz, H.; Dessì, D.; Eberl, C.; Fliegl, H.; Gumbsch, P.; von Hartrott, P.; Mädler, L.; Niebel, M.; Sack, H.; Thomas, A., Ontology modelling for materials science experiments, CEUR Workshop Proceedings, Vol. 2941; Tiddi, I.; Maleshkova, M.; Pellegrini, T.; de Boer, V. (Eds.); Elsevier B.V., Amsterdam, Niederlande (2021) 5 Seiten Link

Durmaz, A.R.; Hadzic, N.; Straub, T.; Eberl, C.; Gumbsch, P., Efficient experimental and data-centered workflow for microstructure-based fatigue data: Towards a data basis for predictive AI models, Experimental Mechanics 61/9 (2021) 1489-1502 Link

Durmaz, A.R.; Müller, M.; Lei, B.; Thomas, A.; Britz, D.; Holm, E.A.; Eberl, C.; Mücklich, F.; Gumbsch, P., A deep learning approach for complex microstructure inference, Nature Communications 12/1 (2021) Art. 6272, 15 Seiten Link

Lichti, T.; Andrä, H.; Leichner, A.; Müller, R.; Wenz, F., Optimal design of unit-cell based programmable materials, PAMM 20/1 Special Issue: 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM); Kuhl, D.; Mesiter, A.; Ricoeur, A.; Wünsch, O. (Eds.); John Wiley & Sons, Inc., Hoboken, NJ, USA (2021) e202000010, 2 Seiten Link

Natkowski, E.; Durmaz, A. R.; Sonnweber-Ribic, P.; Münstermann, S., Fatigue lifetime prediction with a validated micromechanical short crack model for the ferritic steel EN 1.4003, International Journal of Fatigue 152 (2021) Art. 106418; 15 Seiten Link

Reichenbach, R.; Eberl, C.; Lindenmeier, J., Come on, network! Empowering employees to utilize web-based interorganizational learning platforms in research and development, The Learning Organization 28/2 (2021) 167-180 Link

Schmitz-Elbers, M.; Lukinavičius, G.; Smit, T.H., Live fluorescence imaging of F-Actin organization in chick whole embryo cultures using SiR-Actin, Cells 10/7 (2021) Art. 1578, 10 Seiten Link

Schönfeld, D.; Chalissery, D.; Wenz, F.; Specht, M.; Eberl, C.; Pretsch, T., Actuating shape memory polymer for thermoresponsive soft robotic gripper and programmable materials, Molecules 26/3 (2021) Art. 522, 20 S. Link

Specht, M.; Berwind, M.; Eberl, C., Adaptive wettability of a programmable meta‐surface, Advanced Engineering Materials 23/2 (2021) Art. 2001037, 6 Seiten Link

Wenz, F.; Schmidt, I.; Leichner, A.; Lichti, T.; Baumann, S.; Andrae, H.; Eberl, C., Designing shape morphing behavior through local programming of mechanical metamaterials, Advanced Materials 33/37 (2021) Art. 2008617, 8 Seiten Link

to top

2020

Fischer, S.C.L.; Hillen, L.; Eberl, C., Mechanical metamaterials on the way from laboratory scale to industrial applications: Challenges for characterization and scalability, Materials 13/16 (2020) Art. 3605, 16 Seiten Link

Gustmann, T.; Gutmann, F.; Wenz, F.; Koch P.; Stelzer, R.; Drossel, W.-G.; Korn H., Properties of a superelastic NiTi shape memory alloy using laser powder bed fusion and adaptive scanning strategies, Progress in Additive Manufacturing 5/1 (2020) 11-18 Link

Texier, D.; Cadet, C.; Straub, T.; Eberl, C.; Maurel, V., Tensile behavior of air plasma spray MCrAlY coatings: Role of high temperature agings and process defects, Metallurgical and Materials Transactions A 51 (2020) 2766-2777 Link

Thomas, A.; Durmaz, A. R.; Straub, T.; Eberl, C., Automated quantitative analyses of fatigue induced surface damage by deep learning, Materials 13/15 (2020) Art. 3298, 24 Seiten Link

to top

2017-2019

Blug, A.; Regina, D.J.; Eckmann, S.; Senn, M.; Bertz, A.; Carl, D.; Eberl, C., Real-time GPU-based digital image correlation sensor for marker-free strain-controlled fatigue testing, Applied Sciences 9/10 (2019) Artikel-Nr. 2025, 15 Seiten Link

Blug, A.; Regina, D. J.; Eckmann, S.; Senn, M.; Eberl, C.; Bertz, A.; Carl, D., GPU-based digital image correlation system for real-time strain-controlled fatigue and strain field measurement, Proceedings of SPIE Volume 11056, Optical Measurement Systems for Industrial Inspection XI; Lehmann, P. (Hrsg.); Society of Photo-Optical Instrumentation Engineers (SPIE), Bellingham, WA, USA (2019) 110560V 1-10 Link

Gammer, C.; Richard, M.-I.; Eberl, C., Measurement of local strain, MRS Bulletin 44/6 Advances in in situ nanomechanical (2019) 459-464 Link

Wehmeyer, S.; Zok F.; Eberl, C.; Gumbsch, P.; Cohen, N.; McMeeking, R.; Begley, M., Post-buckling and dynamic response of angled struts in elastic lattices, Journal of the Mechanics and Physics of Solids 133 (2019) 103693, 19 Seiten Link

Weinkamer, R.; Eberl, C.; Fratzl, P., Mechanoregulation of bone remodeling and healing as inspiration for self-repair in materials, Biomimetics 4/3 (2019) Art. 46, 16 Seiten Link

Berwind, M.F.; Kamas, A.; Eberl, C., A hierarchical programmable mechanical metamaterial unit cell showing metastable shape memory, Advanced Engineering Materials 20/11 (2018) 1800771 1-6 Link

Buck, M.; Straub, T.; Eberl, C., Experimental investigation of damage detection and crack initiation up to the very high cycle fatigue regime, Fatigue of materials at very high numbers of loading cycles; Christ, H.-J. (Ed.); Springer Spektrum, Wiesbaden (2018) 365-393 Link

Heckman, N.M.; Berwind, M.F.; Eberl, C.; Hodge, A.M.; Microstructural deformation in fatigued nanotwinned copper alloys; Acta Materialia 144 (2018) 138-144 Link

Nakanishi, K.; Aria, A. ; Berwind, M.; Weatherup, R. S.; Eberl, C.; Hofmann, S.; Fleck, N., Compressive behavior and failure mechanisms of freestanding and composite 3D graphitic foams, Acta Materialia 195 (2018) 187-196 Link

Berwind, M.F.; Hashibon, A.; Fromm, A.; Gurr, M.; Burmeister, F.; Eberl, C.; Rapidly prototyping biocompatible surfaces with designed wetting properties via photolithography and plasma polymerization; Microfluidics and Nanofluidics 21/9 (2017) 144 1-7 Link

Fliegener, S.; Kennerknecht, T.; Kabel, M.; Investigations into the damage mechanisms of glass fiber reinforced polypropylene based on micro specimens and precise models of their microstructure; Composites Part B: Engineering 112 (2017) 327-343 Link

to top

2015-2016

Fliegener, S.; Kennerknecht, T.; Kabel, M.; Simulation of the damage mechanisms of glass fiber reinforced polypropylene based on micro specimens and 1:1 models of their microstructure; in Proc. of 17th European Conference on Composite Materials - ECCM17; ESCM -European Society for Composite Materials (Ed.); ESCM -European Society for Composite Materials, Sevilla, Spanien (2016) 8 Seiten Link

Li, X.; Dao, M.; Eberl, C.; Hodge, A.M.; Fracture, fatigue, and creep of nanotwinned metals; MRS Bulletin 41/4 (2016) 298-304 Link

Slaby, S.A.; Kraft, O.; Eberl, C.; Fatigue properties of conventionally manufactured and micro-powder-injection-moulded 17-4PH micro-components; Fatigue and Fracture of Engineering Materials and Structures, 39/6 (2016) 780-789 Link

Senn, M.; Christensen, S.; Kalidindi, S.; Luo, A.; Madison, J.; Raabe, D.; Sun, X.; An integrated surrogate modeling approach for materials and approach for materials and process design; in Proc. of 3rd World Congress on Integrated Computational Materials Engineering ICME 2015; Poole, W.; Christensen, S.; Kalidindi, S.; Luo, A.; Madison, J.; Raabe, D.; Sun, X. (Eds.) John Wiley & Sons Inc., Hoboken, NJ, USA (2015) 331-338 Link

Senn, M.; Schweizer, F.; Pfeiffer, W.; Universal concept for the optimization of step sizes in manufacturing processes; Procedia CIRP 31; Part of special issue: 15th CIRP Conference on Modelling of Machining Operations 15^th CMMO (2015) 53-57 Link

Straub, T.; Berwind, M.F.; Kennerknecht, T.; Lapusta, Y.; Eberl, C.; Small-scale multiaxial setup for damage detection into the very high cycle fatigue regime; Experimental Mechanics 55/7 (2015) 1285-1299 Link

to top

2012-2014

Briot, N. J.; Kennerknecht, T.; Eberl, C.; Mechanical properties of bulk single crystalline nanoporous gold investigated by millimetre-scale tension and compression testing; Philosophical Magazine 94/8 (2014) 847-866 Link

Knetsch, D.; Funk, M.; Kennerknecht, T.; Eberl, C.; Load data calculation in electric axle drives and fatigue assessment for the electric motor subsystem; Materials Testing 56/7-8 (2014) 535-541 Link

Sebastiani, M.; Eberl, C.; Bemporad, E.; Korsunsky, A.M.; Nix, W.D.; Carassiti, F.; Focused ion beam four-slot milling for poisson's ratio and residual stress evaluation at the micron scale; Surface and Coatings Technology 251 (2014) 151-161 Link

Sebastiani, M.; Korsunsky, A.M.; Eberl, C.; Bemporad, E.; Pharr, G. M.; Discussion on "Interfacial residual stress analysis of thermal spray coatings by miniature rind-core cutting combined with DIC method"- by Zhu et al.; Experimental Mechanics 54/7 (2014) 1305-1306 Link

Ulas, S.; Bundschuh, S.; Jester, S.-S.; Eberl, C.; Kraft, O.; Hölscher, H.; Böttcher, A.; Kappes, M.M.; Mechanical properties of C58 materials and their dependence on thermal treatment; Carbon 68 (2014) 125-137 Link

Yoo, B.-G.; Boles, S.T.; Liu, Y.; Zhang, X.; Schwaiger, R.; Eberl, C.; Kraft, O.; Quantitative damage and detwinning analysis of nanotwinned copper foil under cyclic loading; Acta Materialia 81 (2014) 184-193 Link

Hoepfel, H.; Pfeiffer, W.; Shaping of ceramics using residual stresses; Materials Science Forum 768-769 (2013) 478-483 Link

Pinneker, V.; Eberl, C.; Sozinov, A.; Ezer, Y.; Kohl, M.; Magnetic field-induced local strain bands in single crystalline Ni-Mn-Ga foils; Journal of Alloys and Compounds 577/1 (2013) 358-361 Link

Senn, M.; Link, N.; Gumbsch, P.; Optimal process control through feature-based state tracking along process chains; in Proc. of 2nd World Congress on Integrated Computational Materials Engineering ICME; Li, M.; Campbell, C.; Thornton, K.; Holm, E.; Gumbsch, P. (Eds.); John Wiley & Sons Inc., Hoboken, NJ, USA (2013) 69-74 Link

Straub, T.; Theillet, P.-O.; Eberl, C.; Pierron, O.N.; Comparison of the stress distribution and fatigue behavior of 10- and 25-μm-thick deep-reactive ion-etched Si kilohertz resonators; Journal of Microelectromechanical Systems 22/2 (2013) 418-429

Zhao, S.; Gan, Y.; Kamlah, M.; Kennerknecht, T.; Rolli, R.; Influence of plate material on the contact strength of Li4OSi4 pebbles in crush tests and evaluation of the contact strength in pebble-pebble contact; Engineering Fracture Mechanics 100 (2013) 28-37 Link

Bückmann, T.; Stenger, N.; Kadic, M.; Kaschke, J.; Frölich, A.; Kennerknecht, T.; Eberl, C.; Thiel, M.; Wegener, M.; Tailored 3D mechanical metamaterials made by dip-in direct-laser-writing optical lithography; Advanced Materials 24/20 (2012) 2710-2714

Eberl, C.; Courty, D.; Walcker, A.; Kraft, O.; Stress-gradient induced fatigue at ultra high frequencies in sub micron thin metal films; International Journal of Materials Rresearch 103/1 (2012) 80-86

Straub, T.; Baumert, E.K.; Eberl, C.; Pierron, O.N.; A method for probing the effects of conformal nanoscale coatings on fatigue crack initiation in electroplated Ni films; Thin Solid Films 526 (2012) 176–182

to top

2009-2011

Burger, S.; Eberl, C.; Siegel, A.; Ludwig, A.; Kraft, O.; A novel high-throughput fatigue testing method for metallic thin Films; Science and Technology of Advanced Materials 12/5 (2011) 054202 1-7

Burger, S.; Rupp, B.; Ludwig, A.; Kraft, O.; Eberl, C.; Fatigue testing of thin films; Key Engineering Materials 465 (2011) 552-555

Eberl, C.; Gianola, D. S.; Wang, X.; He, M. Y.; Evans, A. G.; Hemker, K. J.; A method for in situ measurement of the elastic behavior of a columnar thermal barrier coating; Acta Materialia 59/9 (2011) 3612-3620

Eberl, C.; Wang, X.; Gianola, D. S.; He, M. Y.; Evans, A. G.; Hemker, K. J.; In situ measurement of the toughness of the interface between a thermal barrier coating and a Ni alloy; Journal of the American Ceramic Society 94/1 (2011) 120–127

Funk, M.; Eberl, C.; Investigations on the fatigue behavior of nanocrystalline metals; Key Engineering Materials 465 (2011) 207-210

Funk, M.; Ma, K.; Eberl, C.; Schoenung, J. M.; Göken, M.; Hemker, K. J.; High Temperature mechanical behavior of end-of-life cryomilled NiCrAlY bond coat materials; Metallurgical and Materials Transactions A 42 (2011) 2233-2241

Prokop, J.; Eberl, C.; Funk, M.; Prüfe, P.; Lorenz, J.; Piotter, V.; Welz, M.; Ritzhaupt-Kleissl, H.-J.; Mechanical testing of micro samples produced by a novel LIGA related process chain; Microsystem Technologies 17/2 (2011) 281–288

Sebastiani, M.; Bemporad, E.; Eberl, C.; Pharr, G. M.; Depth-resolved residual stress analysis of thin coatings by a new FIB-DIC method; Materials Science and Engineering: A 528/27 (2011) 7901-7908

Senger, J.; Weygand, D.; Motz, C.; Gumbsch, P.; Kraft, O.; Aspect ratio and stochastic effects in the plasticity of uniformly loaded micrometer-sized specimens; Acta Materialia 59/8 (2011) 2937-2947 Link

Eberl, C.; Gianola, D. S.; Hemker, K. J.; Mechanical characterization of coatings using microbeam bending and digital image correlation techniques; Experimental Mechanics 50/1 (2010) 85–97

Eberl, C.; Riesch-Oppermann, H.; Spolenak, R.; Kubat, F.; Ruile, W.; Courty, D.; Kraft, O.; In situ observations and quantitative analysis of short circuit probability due to ultra high frequency fatigue; IEEE Transactions on Device and Materials Reliability  10/3 (2010) 366 - 373

Eberl, C.; Saif, T.; In situ mechanical testing of biological and/or inorganic materials at the microscale and -/nanoscale; MRS Bullettin 35/5 (2010) 347-350

Balk, T. J.; Eberl, C.; Sun, Y.; Hemker, K. J.; Gianola, D. S.; Tensile and compressive microspecimen testing of bulk nanoporous gold; JOM 61/2 (2009) 26-31

Gianola, D. S.; Eberl, C.; Micro- and nanoscale tensile testing of materials; JOM 61/3 (2009) 24-35

Joshi, S. P.; Eberl, C.; Cao, B. Y.; Ramesh, K. T.; Hemker, K. J.; On the occurrence of Portevin – Le Châtelier instabilities in ultrafine-grained 5083 aluminum alloys; Experimental Mechanics 49/2 (2009) 207-218

to top

2005-2008

Gianola, D. S.; Eberl, C.; Cheng, X. M.; Hemker, K. J.; Stress-driven surface topography evolution in nanocrystalline Al thin films; Advanced Materials 20/2 (2008) 303–308

Hemker, K. J.; Mendis, B. G.; Eberl, C.; Characterizing the microstructure and mechanical behavior of two-phase NiCoCrAlY bond coat for thermal barrier systems; Materials Science and Engineering: A 483-484 (2008) 727-730

Lewis, A. C.; Eberl, C.; Hemker, K. J.; Weihs, T. P.; Grain boundary strengthening in copper/niobium multilayered foils as a function of temperature and strain rate; JMR Journal of Materials Research 23/2 (2008) 376-382

Lewis, A. C.; van Heerden, D.; Eberl, C.; Hemker, K. J.; Weihs, T. P.; Deformation mechanisms in fine-grained niobium; Acta Materialia 56/13 (2008) 3044-3052

Lohmiller, J.; Eberl, C.; Kraft, O.; Balk, T. J.; Mechanical spectroscopy of nanocrystalline nickel near room temperature; Scripta Materialia 59/4 (2008) 467-470

Eberl, C.; Spolenak, R.; Kraft, O.; Ruile, W.; Arzt, E.; Fatigue damage in thin film Al interconnects at ultra high frequency: A Finite Element Analysis approach; Thin Solid Films 515/6 (2007) 3291-3297

Sharpe Jr., W. N.; Pulskamp, J.; Gianola, D. G.; Eberl, C.; Polcawich, R. G.; Thompson, R. J.; Strain measurement of silicon dioxide microspecimens by digital image processing; Experimental Mechanics 47/5 (2007) 649–658

Eberl, C.; Spolenak, R.; Arzt, E.; Kubat, F.; Leidl, A.; Ruile, W.; Kraft, O.; Ultra high-cycle fatigue in pure Al thin films and line structures; Materials Science and Engineering: A 421/1-2 (2006) 68-76

Eberl, C.; Spolenak, R.; Kraft, O.; Kubat, F.; Ruile, W.; Arzt, E.; Fatigue at ultra high frequencies in Al thin films; Journal of Applied Physics 99/11 (2006)

Kubat, F.; Ruile, W.; Eberl, C.; Hesjedal, T.; Reindl, L. M.; Qualitative and quantitative analysis of acoustomigration effects in SAW-devices; Microelectronic Engineering 82/1-4 (2005) 655-659

Orso, S.; Wegst, U. G. K.; Eberl, C.; Arzt, E.; Micrometer scale tensile testing of biological attachment devices; Advanced Materials 18/7 (2005) 874–877

Spolenak, R.; Sauter, L.; Eberl, C.; Reversible orientation – biased grain growth in thin metal films induced by a focused ion beam; Scripta Materialia 53/11 (2005) 1291-1296

to top

to top