Fraunhofer IWM participations:
Fraunhofer IWM participations:
For 20 years now the Fraunhofer Materials and Components Group – MATERIALS - has been integrating the expertise of the Fraunhofer Institutes working in the field of materials science. With more than 2,500 scientists, working in 15 Institutes, and a total annual budget of around € 500 million in the area of contract research, it constitutes the largest group within the Fraunhofer Gesellschaft.
Materials research and materials technology at Fraunhofer cover the entire value chain, from the development of new and the improvement of existing materials, through manufacturing technology on a quasi-industrial scale, up to the characterization of properties and assessment of service behavior. The same research scope applies to the components made from these materials and the way they function in systems.
The scientists working in the Group's institutes deploy their knowhow and expertise on behalf of their customers specifically in the fields of energy and environment, mobility, healthcare, machine and plant construction, building construction & living, microsystems technology and safety. They are part of strong national and international networks and contribute towards material-related innovations and innovative processes in a wide range of working fields.
With the initiative Materials Data Space© (MDS) founded in 2015, the Group is presenting a roadmap towards Industry 4.0 enabled materials. Digitalization of materials along their entire value creation chain is viewed by the Group as a key requirement for the lasting success of Industry 4.0. The rationale behind the Materials Data Space© concept is to provide a new platform offering digital information about materials and material properties across multiple corporations along the entire value creation chain.
The spectrum ranges from modeling and simulations through the application-oriented development of ceramic materials, manufacturing processes and processing technologies to component characterization, assessment and non-destructive testing under operational conditions.
Dr. Andreas Kailer
Phone +49 761 5142-247
The Fraunhofer Battery Alliance develops technical solutions and concepts related to the topic of electrochemical energy storage (batteries, supercapacitors). The competencies of this alliance cover the fields of materials, systems, simulations and testing.
Dr. Leonhard Mayrhofer
Phone +49 761 5142-388
Generative manufacturing techniques are far better than conventional techniques for producing small series of customized, complex components in terms of flexibility, labor intensity and material input. The alliance is dedicated to the development, application and implementation of generative manufacturing techniques and processes.
Dr. Raimund Jaeger
Phone +49 761 5142-284
The quality of a lightweight structure is determined to a significant extent by its material properties, the shape given to it by its designer, its construction and the manufacturing process. Within the Alliance, the entire development chain is taken into consideration, from the material and product development stage through series production and approval to the practical use of the product.
Dr. Michael Luke
Phone +49 761 5142-338
This alliance pools the competencies of various institutes from the information and communication sector, the field of materials and components and the surfaces and production technology sector to develop and improve simulation processes.
Working together with industry partners, the five Freiburg-based Fraunhofer institutes are addressing the interdisciplinary research topics concerned with sustainable social and economic development and putting them into practice in concrete innovations. Through projects, publications and patents, business start-ups with industry partners and extensive teaching and training at the Institute for Sustainable Technical Systems (INATECH), the Sustainability Center is developing joint potentials regarding sustainability issues.
In collaboration with the Institute for Technology of Karlsruhe University of Applied Sciences and the FZI Research Center for Information Technology, four Fraunhofer institutes plus the "New Drive Systems" project group (Projektgruppe Neue Antriebssysteme, NAS) are researching topics on efficient, intelligent and integrated mobility. This center links important actors from science, applied research and industry. The forward-looking themes here range from the mobility demands of an aging population, urbanization through changed city infrastructure, automated and autonomous mobility to lightweight and (hybrid) electric and internal combustion drive systems for increased efficiency and the minimization of CO2 emissions.
Five Fraunhofer institutes are improving synthetic rubber to make its performance as high as that of natural rubber. Research areas include how natural proteins and lipids provide specific properties and analyzing the uses for these in synthetic rubber. Experts at the Fraunhofer IWM are working on experimental methods of investigating the friction resistance of the elastomer composite. The project runs from 03/01/15 - 12/31/18.
In the CS³ project four Fraunhofer institutes are developing system solutions and test methods for low-maintenance, durable components for subsea applications. It is intended that new diamond ceramic and carbide materials will enable component properties to be realized that allow dependable operation at depths of up to 6000 m. Scientists at the Fraunhofer IWM are developing joining techniques along with manufacturing and simulation methods for extremely corrosion-resistant diamond ceramics that can withstand high temperatures and pressures. The project runs from 02/01/16 - 01/31/19.
Three Fraunhofer institutes are developing and qualifying laser multilayer minimum-gap welding processes for thick-walled, high-temperature components in nickel-based materials. Scientists at the Fraunhofer IWM are characterizing the mechanical properties of welded joints under practically relevant loads and are developing a lifetime prediction tool with which the time at which cracking is initiated and the rate of crack growth in welded components can be predicted under a flexible mode of operation. The project runs from 03/01/15 - 08/31/18.
Ceramic fiber-reinforced ceramic materials (CMC) are intended to be the key components for next-generation gas turbines. The scientific-technical basics for their use in the hot gas section of future aircraft engines is provided by four Fraunhofer Institutes: this applies to the entire chain from material production to characterization and modelling of the materials up to the machining and evaluation of the application behavior of components made of CMC. The project runs from 01/01/17 - 12/31/19.
Three Fraunhofer institutes are working to create the technological basis for new types of photovoltaically active perovskite materials for applications on a scale of square meters. To enable this, the perovskite materials must be integrated on a large scale into the component to protect them from water, oxygen and ion drift, and must be electrically contacted in order to demonstrate a new, locally manufacturable solar cell. The project runs from 02/01/16 - 01/31/19.
In the context of increasing the holistic consideration of structures and components, acoustic behavior for product design gains importance. This applies in particular for components made of non-reinforced and fiber-reinforced plastics, since due to its low specific weight, its acoustic behavior is often problematic. Five Fraunhofer Institutes are developing numerical methods within the interdisciplinary research project, which allow the targeted microstructural design of such materials to optimize their acoustic properties. This project runs from 04/01/18 – 03/31/21.
Dr. Jörg Hohe
Phone +49 761 5142-340
The Fraunhofer IWM is developing printable products for sheet metal forming, nanoscale solid lubricant systems in order to steer the tribological properties of the sheets and the material flow during the deep-drawing tool and machine independent -send. In the future, the system is to be developed with the aid of digital twin materials. This project runs from 07/01/18 – 06/30/19.
Prof. Dr. Martin Dienwiebel
Telefon +49 721 204327-77
Programmable materials are shape and function-dynamic materials, material composites or surfaces, the properties of which are controlled in a targeted manner and can be reverse modified. They consist of three-dimensional microstructures of polymers, metals or ceramics. Such materials provide a unique potential for innovative system solutions, which offer a considerably extended functionality achieved by targeted material changes. This project runs from beginning 2018 till 25.09.22.
For sheet metal forming, the Fraunhofer IWM develops printable, nanoscale solid lubricant systems to control the tribological properties of the sheets as well as the material flow during deep drawing independent of components and machines. In the future, the system will be developed with the aid of digital twin materials. The project runs from 2015 till 01/31/21.
The Fraunhofer-Gesellschaft’s expertise in artificial diamonds is applied and developed here in the field of power electronics. Materials scientists at the Fraunhofer IWM are developing the technology for separating precisely oriented crystalline metal layers on substrate surfaces, on which project partners can then isolate single-crystal diamond layers.