Lagger, H.; Particle-based simulation of sheared magnetorheological fluids, Dissertation, Albert-Ludwigs-Universität Freiburg (2014) Link
Bierwisch, C.; Numerical Simulations of Granular Flow and Filling, Dissertation, Fakultät für Mathematik und Physik der Albert-Ludwigs-Universität Freiburg (2009)
Dietemann, B.; Bosna, F.; Lorenz, M.; Travitzky, N.; Kruggel-Emden, H.; Kraft, T.; Bierwisch, C., Modeling robocasting with smoothed particle hydrodynamics: Printing gap-spanning filaments, Additive Manufacturing 36 (2020) Art. 101488 1-9 Link
Dietemann, B.; Kraft, T.; Kruggel-Emden, H.; Bierwisch, C., A Smoothed Particle Hydrodynamics scheme for arbitrarily shaped rigid bodies within highly viscous fluids, Journal of Computational Physics: X 8 (2020) Art. 100068, 25 Seiten Link
Lorenz, M.; Dietemann, B.; Wahl, L.; Bierwisch, C.; Kraft, T.; Kruggel-Emden, H.; Travitzky, N., Influence of platelet content on the fabrication of colloidal gels for robocasting: Experimental analysis and numerical simulation, Journal of the European Ceramic Society 40/3 (2020) 811-825 Link
Bierwisch, C.; Mohseni-Mofidi, S.; Dietemann, B.; Rudloff, J.; Baumann, S.; Popp, K.; Lang, M., Particle-based simulations and dimensional analysis of selective laser sintering of PA12 powders, II International Conference on Simulation for Additive Manufacturing - Sim-AM 2019; Auricchio, F.; Rank, E.; Kollmannsberger, S.; Morganti, S. (Eds.); Artes Gráficas Torres S.L., Cornellà de Llobregat, Spain (2019) 316-327 Link
Bierwisch, C., DEM powder spreading and SPH powder melting models for additive manufacturing process simulations, VI International Conference on Particle-Based Methods. Fundamentals and Applications - PARTICLES 2019; Oñate, E.; Wriggers, P.; Zohdi, T.; Bischoff, M.; Owen, D.R.J. (Eds.); Artes Gráficas Torres S.L., Cornellà de Llobregat, Spain (2019) 434-443 Link
Bierwisch, C., Numerical simulations of melt pool dynamics in powder-bed additive manufacturing processes, in Proc. of International Congress on Particle Technology - PARTEC 2019; Heinrich, S. (Hrsg.); VDI Wissensforum GmbH, Düsseldorf 2019 4 Seiten Link
Dietemann, B.; Bierwisch, C; Kraft, T., Additive manufacturing of ceramics: Mobility of ceramic grains during printing, PARTEC 2019: International Congress on Particle Technology; Heinrich, S. (Hrsg.); VDI Verlag GmbH, Düsseldorf (2019) 5 Seiten Link
Dietemann, B.; Kraft, T.; Bierwisch, C., A scheme for rigid bodies within highly viscous liquids, SPHERIC 2019: Proceedings of the 14th SPHERIC International Workshop 2019; Loren-Aguilar, P., Bate, M. R.; Rasull, H.; Ali, A.; Wurster, J. (Eds.); University of Exeter, Exeter, UK (2019) 17-23 Link
Goldbeck, G.; Ghedini, E.; Hashibon, A.; Schmitz, G.J.; Friis, J., A reference language and ontology for materials modelling and interoperability, A world of engineering simulation : NWC, NAFEMS World Congress 2019; NAFEMS Ltd, Hamilton, Scotland (2019) Article NWC_19_86, 13 Seiten Link
Mohseni Mofidi, S., Bierwisch, C., SPH simulations of magnetorheological abrasive flow machining at a microscopic scale, in Proc. of International Congress on Particle Technology - PARTEC 2019; Heinrich, S. (Hrsg.); VDI Wissensforum GmbH, Düsseldorf (2019) 4 Seiten Link
Shahrivar, B.; Morillas, J. R.; Luengo, Y.; Gavilan, H.; Morales, P.; Bierwisch, C.; de Vincente, J., Rheological behavior of magnetic colloids in the borderline between ferrofluids and magnetorheological fluids, Journal of Rheology 63/4 (2019) 547-558 Link
Bierwisch, C., A surface tension and wetting model for the δ+-SPH scheme, SPHERIC 2018: Proceedings of the 13th SPHERIC International Workshop 2018; Quinlan, N. J.; Tong, M.; Moghimi, M. H.; McLoone, M. (Eds.); National University of Ireland, Galway, Ireland (2018) 95-102 Link
Han, X.; Courseau, J.; Khamassi, J.; Nottrodt, N.; Engelhardt, S.; Jacobsen, F.; Bierwisch, C.; Meyer, W.; Walter, T.; Weisser, J.; Jaeger, R.; Bibb, R.; Harris, R., Optimized vascular network by stereolithography for tissue engineered skin, International Journal of Bioprinting 4/2 (2018) Art. 134, 17 Seiten Link
Adamovic, N.; Asinari, P.; Goldbeck, G.; Hashibon, A.; Hermansson, K .; Hristova-Bogaerds, D.;Koopmans, R.; Verbrugge, T.; Wimmer, E., European Materials Modelling Council, Proc. of 4th World Congress on Integrated Computational Materials Engineering (ICME 2017). The Minerals, Metals & Materials Series; Mason, P.; Fisher, C.R.; Glamm, R.; Manuel, M.V.; Schmitz, G.J.; Singh, A.K.; Strachan, A. (Eds.); Springer, Cham (2017) 79-92 Link
Berwind, M.F.; Hashibon, A.; Fromm, A.; Gurr, M.; Burmeister, F.; Eberl, C.; Rapidly prototyping biocompatible surfaces with designed wetting properties via photolithography and plasma polymerization; Microfluidics and Nanofluidics 21/9 (2017) 144 1-7 Link
Bierwisch, C.; Polfer, P.; Scaling laws for implicit viscosities in smoothed particle hydrodynamics; EPJ Web of Conferences 140; Powders and Grains 2017 - 8th International Conference on Micromechanics on Granular Media; Radjai, F.; Nezamabadi, S.; Luding, S.; Delenne, J.Y. (Eds.); EDP Sciences, Les Ulis; France (2017) 15008 1-4 Link
Breinlinger, T.; Schubert, R.; Hashibon, A.; Kraft, T.; Modelling die filling for powders with complex rheology: A new DEM contact-model; in Proc. of 19th Plansee Seminar 2017; Sigl, L. S.; Kestler, H.; Pilz, A. (Eds.); Plansee Group Service GmbH, Reutte/Tirol, Österreich (2017) HM 26/1-7 Link
Fu, Z.; Freihart, M.; Schlordt, T.; Fey, T.; Kraft, T.; Greil, P.; Travitzky, N.; Robocasting of carbon-alumina core-shell composites using co-extrusion; Rapid Prototyping Journal 23/2 (2017) 423-433 Link
Mohseni-Mofidi, S.; Nutto, C.; Lagger, H.; Bierwisch, C.; SPH simulations of magnetorheological abrasive flow machining at a microscopic scale; in Proc. of 12th International Smoothed Particle Hydrodynamics European Research Interest Community SPHERIC Workshop; Crespo, A. J. C.; Gómez Gesteira, M.; Altomare, C. (Eds.); Universidade de Vigo, Ourense, Spanien (2017) 412-417; 290/2017 Link
Rasp, T.; Jamin, C.; Guillon, O.; Kraft, T.; Cracking and shape deformation of cylindrical cavities during constrained sintering; Journal of the European Ceramic Society 37/8 (2017) 2907–2917 Link
Schubert, R.; Kraft, T.; Bierwisch, C., Convergence study of the Immersed Domain method for periodic particle configurations, Powder Technology 337 (2017) 104-110 Link
Bedoya-Martínez, O.N.; Hashibon, A.; Elsässer, C.; Influence of point defects on the phonon thermal conductivity and phonon density of states of Bi2Te3; Physica Status Solidi A 213/3 (2016) 684–693 Link
Bierwisch, C.; Schubert, R.; Kraft, T.; Dehning, C.; Discrete and finite element co-simulations; in Proc. of International Congress on Particle Technology PARTEC 2016; VDI Wissensforum GmbH (Hrsg.); VDI Verlag GmbH, Düsseldorf (2016) 4 Seiten
Breinlinger, T.; Hashibon, A.; Schubert, R.; Kraft, T.; Simulation of die filling for powders with complex rheology; in Proc. of International Congress on Particle Technology PARTEC 2016; VDI Wissensforum GmbH (Hrsg.); VDI Verlag GmbH, Düsseldorf (2016) 4 Seiten; 1406/2016 Link
Breinlinger, T.; Kraft, T.; Coupled discrete element and smoothed particle hydrodynamics simulations of the die filling process; Computational Particle Mechanics 3/4 (2016) 505-511 Link
Hashibon, A.; Breinlinger, T.; Schubert, R.; Kraft, T.; A DEM contact-model for history-dependent powder flows; Computational Particle Mechanics 3/4 (2016) 437-448 Link
Hashibon, A.; Breinlinger, T.; Schubert, R.; Kraft, T.; A new DEM contact-model for simulating die filling for powders with complex rheology; in Proc. of World PM2016; European Powder Metallurgy Association, Shrewsbury, UK (2016) 6 Seiten Link
Khamassi, J.; Bierwisch, C.; Pelz, P.; Geometry optimization of branchings in vascular networks; Physical Review E 93/6 (2016) 062408-1 Link
Kozinsky, B.; Akhade, S.A.; Hirel, P.; Hashibon, A.; Elsässer, C.; Mehta, P.; Logeat, A.; Eisele, U.; Effects of sublattice symmetry and frustration on ionic transport in garnet solid electrolytes; Physical Review Letters 116/5 (2016) 055901 1-5 Link
Othmani, Y.; Böhlke, T.; Lube, T.; Fellmeth, A.; Chlup, Z.; Colonna, F.; Hashibon, A.; Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data; Journal of the European Ceramic Society 36/5 (2016) 1109-1125 Link
Peranio, N.; Eibl, O.; Bäßler, S.; Nielsch, K.; Klobes, B.; Hermann, R. P.; Daniel, M.; Albrecht, M.; Görlitz, H.; Pacheco, V.; Bedoya-Martinez, N.; Hashibon, A.; Elsässer, C.; From thermoelectric bulk to nanomaterials: Current progress for Bi2Te3 and CoSb3; Physica Status Solidi A 213/3 (2016) 739-749 Link
Polfer, P.; Kraft, T.; Bierwisch, C.; Suspension modeling using smoothed particle hydrodynamics: accuracity of the viscosity furmulation and the suspended body dynamics; Applied Mathematical Modelling 40/4 (2016) 2606-2618 Link
Schubert, R.; Yan, Z.; Marigo, M.; Kraft, T.; DEM modelling of powder flow and powder filling during die compaction, in Proc. of International Congress on Particle Technology PARTEC 2016; VDI Wissensforum GmbH (Hrsg.); VDI Verlag GmbH, Düsseldorf (2016) 4 Seiten; 1405/2016 Link
Adler, J.; Adler, O.; Kreif, M.; Cohen, O.; Grosso, B.; Hashibon, A.; Cooper, V.R.; Mini-review of Electron Density Visualization; Physics Procedia 68; Special Issue: Proc. of the 28th Workshop on Computer Simulation Studies in Condensed Matter Physics CSP2015 (2015) 2-6 Link
Breinlinger, T.; Hashibon, A.; Kraft, T.; Simulation of the spray drying of single granules: The correlation between microscopic forces and granule morphology; Journal of the American Ceramic Society 98/6 (2015) 1778-1786 Link
Breinlinger, T.; Hashibon, A.; Kraft, T.; Simulation of the influence of surface tension on granule morphology during spray drying using a simple capillary force model; Powder Technology 283 (2015) 1-8 Link
Dehning, C.; Bierwisch, C.; Kraft, T.; Co-simulations of discrete and finite element codes; Meshfree Methods for Partial Differential Equations VII; Lecture notes in computational science and engineering 100; Griebel, M.; Schweitzer, M.A. (Eds.); Springer International Publishing, Cham, Schweiz (2015) 61-79 Link
Fu, Z.; Polfer, P.; Kraft, T.; Roosen, A.; Correlation between anisotropic green microstructure of spherical-shaped alumina particles and their shrinkage behavior; Journal of the American Ceramic Society 98/11 (2015) 3438–3444 Link
Fu, Z.; Polfer, P.; Kraft, T.; Roosen, A.; Three-dimensional shrinkage behavior of green tapes derived from spherical-shaped powders: Experimentical studies and numerical simulations; Journal of the European Ceramic Society 35/8 (2015) 2413–2425 Link
Grosso, B.; Cooper, V.R.; Pine, P.; Hashibon, A.; Yaish, Y.; Adler, J.; Visualization of electronic density; Computer Physics Communications 195 (2015) 1-13 Link
Hashibon, A.; Elsässer, C.; Density-functional theory study of point defects in Bi2Te3; Thermoelectric Bi2Te3 Nanomaterials; Eibl, O.; Nielsch, K.; Peranio, N.; Völklei, F. (Eds.); Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim (2015) 167-186 Link
Hashibon, A.; Rasp, N.; Franklin, N.; Tziakos, I.; Pinte, D.; Dadvand, P.; Roig, C.; Mattila, K.; Puurtinen, T.; Hiltunen, K.; Roman-Perez, G.; Garcia, G.; Adler, J.; Common Universal Data Structures (CUDS) and Vocabulary in the SimPhoNy Integrated Framework; in Proc. of INTOP 2015, the 3rd Workshop of the European Multi-scale Modelling Cluster EUMMC: Interoperability in MultiscaleModelling of Nano-enabled Materials; Kilappa, V.; Mattila, K. (Eds.); University of Jyväskylä, Department of Physics, Jyväskylä, Finland (2015) 21-22 Link
Lagger, H.; Breinlinger, T.; Di Renzo, A.; Di Maio, F. P.; Korvink, J.; Moseler, M.; Bierwisch, C.; Influence of hydrodynamic drag model on shear stress in the simulation of magnetorheological fluids; Journal of Non-Newtonian Fluid Mechanics 218 (2015) 16-26 Link
Polfer, P.; Breinlinger, T.; Kraft, T.; Simulation of tape casting: Capabilities and potentials; CFI Ceramic Forum International, Berichte der deutschen Keramischen Gesellschaft DKG 92/9 (2015) E181-E186 Link
Zellmer, S.; Garnweitner, G.; Breinlinger, T.; Kraft, T.; Schilde, C.; Hierarchical structure formation of nanoparticulate spray-dried composite aggregates; ACS Nano 9/11 (2015) 10749–10757 Link
Breinlinger, T.; Kraft, T.; A simple method for simulating the coffee stain effect; Powder Technology 256 (2014) 279-284 Link
Hashibon, A.; Gurr, M.; Polfer, P.; Burmeister, F.; Kraft, T.; Computational design of weitting and spreading behaviour for enhanced in-vitro-diagnostic applications; in Proc. of 2nd International Conference on MicroFluidic Handling Systems MFHS 2014; Koltay, P.; Lötters, J.; Urban, G. (Eds.); University of Freiburg, Freiburg (2014) 176-180 Link
Wunscher, S.; Rasp, T.; Grouchko, M.; Kamyshny, A.; Paulus, R.M.; Perelaer, J.; Kraft, T.; Magdassi, S.; Schubert, U.S.; Simulation and prediction of the thermal sintering behavior for a silver nanoparticle ink based on experimental input; Journal of Materials Chemistry C Materials for optical and electronic devices 2/31 (2014) 6342-6352 Link
Ziegler, T.; Kraft T.; Functionally graded materials with a soft surface for improved indentation resistance: Layout and corresponding design principles; Computational Materials Science 86 (2014) 88-92 Link
Bierwisch, C.; Moseler, M.; Numerical study of grain shape in granular lubrication; in Proc. of 5th World Tribology Congress WTC 2013, Raparelli, T.; Gola, M. (Eds.); (2013) 3216-3129 Link
Breinlinger, T.; Polfer, P.; Hashibon, A.; Kraft, T.; Surface tension and wetting effects with smoothed particle hydrodynamics; Journal of Computational Physics 243 (2013) 14-27 Link
Jamin, C.; Rasp, T.; Kraft, T.; Guillon, O.; Constrained sintering of alumina stripe patterns on rigid substrates: effect of stripe geometry; Journal of the European Ceramic Society 33/15-16 (2013) 3221-3230 Link
Kraft, T.; Schmidt, I.; Riedel, H.; Svoboda J.; Numerical simulation of organic binder decomposition during thermal debinding; in Proc. of 18th Plansee Seminar 2013, Sigl, L.S.; Kestler, H.; Wagner, J. (Hrsg.); Plansee SE, Reutte, Österreich (2013) HM 14/1-6 Link
Lagger, H.G.; Bierwisch, C.; Moseler, M.; Gola, M.; Effects of wall roughness on shear stress in a magnetorheological fluid shear cell; in Proc. of 5th World Tribology Congress WTC 2013, Raparelli, T.; Gola, M. (Eds.); (2013) 3539-3542 Link
Lagger, H.; Bierwisch, C.; Moseler, M.; MRF in a plate-plate magnetorheometer: Numerical insight into the particle-wall interface; Journal of Physics: Conference Series (JPCS) 412/1 (2013) Art. 012020 1-7 Link
Nutto, C.; Bierwisch, C.; Lagger, H.; Moseler M.; Particle-based simulations of abrasive flow machining; in Proc. of 5th World Tribology Congress WTC 2013; Raparelli, T.; Gola, M. (Eds.); (2013) 3071-3074 Link
Rasp, T.; Kraft, T.; Riedel, H.; Discrete element study on the influence of initial coordination numbers on sintering behavior; Scripta Materialia 69/11-12 (2013) 805-808; Link
Kieback, B.; Noethe, M.; Grupp, R.; Banhart, J.; Rasp, T.; Kraft, T.; Analysis of particle rolling and intrinsic rotations in copper powder during sintering; Journal of Materials Science: JMS 47/20 (2012) 7047-7055 Link
Rasp, T.; Jamin, C.; Wonisch, A.; Kraft, T.; Guillon, O.; Shape distortion and delamination during constrained sintering of ceramic stripes: Discrete element simulations and experiments; Journal of the American Ceramic Society 95/2 (2012) 586-592 Link
Schmidt, I.; Riedel, H.; Svoboda, J.; Numerical simulation of organic binder decomposition and combined seepage- and diffusive transport of the gaseous reaction products through a porous green body during thermal debinding of ceramic parts; PAMM 12/1 Special Issue: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics GAMM (2012) 397-398 Link
Bierwisch, C.; Kübler, R.; Kleer, G.; Moseler, M.; Modelling of contact regimes in wire sawing with dissipative particle dynamics; Philosophical Transactions of the Royal Society A 369/1945 (2011) 2422-2430 Link
Breinlinger, T.; Wonisch, A.; Kraft, T.; Simulation of particulate flows using coupled SPH and DEM simulations; in Schriftenreihe Schiffbau, Rung, T.; Ulrich, C. (Hrsg.); Technische Universität Hamburg-Harburg, Hamburg (2011) 66-71
Lagger, H.; Peguiron, J.; Bierwisch, C.; Moseler, M.; Magnetization models for particle-based simulations of magnetorheological fluids; in Proc. of IV International Conference on Computational Methods for Coupled Problems in Science and Engineering, Papadrakakis, M.; Onate, E.; Schrefler, B. (Eds.); International Center for Numerical Methods, in Engineering (CIMNE) Barcelona, Spanien (2011) CD-ROM Link
Polfer, P.; Wonisch, A.; Kraft, T.; Smoothed particle hydrodynamics simulation of non-spherical particle suspensions; in Particles-Based Methods II – Fundamentals and Applications, Onate, E.; Owedn, D.R.J. (Eds.); International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spanien (2011) CD-ROM Link
Schmidt, I.; Numerical homogenisation of an elasto-plastic model-material with large elastic strains: Macroscopic yield surfaces and the Eulerian normality rule; Computational Mechanics 48 (2011) 579-590 Link
Wonisch, A.; Polfer, P.; Kraft, T.; Dellert, A.; Heunisch, A.; Roosen, A.; A comprehensive simulation scheme for tape casting: from flow behavior to anisotropy development; Journal of American Ceramic Society 94/7 (2011) 2053-2060 Link
Schmidt, I.; Kraft, T.; Simulation of the co-sintering of composite structures; International journal materials research 101/8 (2010) 933-941 Link
Schmidt, I.; Trondl, A.; Kraft, T.; Wonisch, A.; Simulation of the material behaviour of metal powders during compaction; J. Process Mech. Eng. 224 (2010) 187-194 Link
Bierwisch, C.; Kraft, T.; Riedel, H.; Moseler, M.; Die filling optimization via three-dimensional discrete element modeling; Powder Technology 196 (2009) 169-179 Link
Bierwisch, C.; Kraft, T.; Riedel, H.; Moseler, M.; Three-dimensional discrete element models for the granular statics and dynamics of powders in cavity filling; Journal or the Mechanics and Physics of Solids 57/1 (2009) 10-31 Link
Heinonen, J.; Schmidt, I.; An analysis of the stress state in a green part during ejection from the die; in Proc. of Euro PM 2009, EPMA, Shrewsbury, UK (2009) 53-54 Link
Seifert, T.; Schmidt, I.; Plastic yielding in cyclically loaded porous materials; International Journal Plasticity 25 (2009) 2435-2453 Link
Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.; Effect of different particle size distributions on solid-state sintering: A microscopic simulation approach; Journal of the American Ceramic Society 92 (2009) 1428-1434 Link
Weber, B.; Bierwisch, C.; Kübler, R.; Kleer, G.; Investigation on the sawing of solar silicon by application of wires of 100 µm diameter; in Proc. of European Commission: 23th European Photovoltaic Solar Energy Conference and Exhibition 2008, Valencia, Spain (2008) 1285-1288; ISBN: 3-936338-24-8 Link
Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.; Discrete element simulations of constrained ceramic powder sintering; cfi/Ber. DKG 85/13 (2008) 18-23 Link
Yazici, B.A.; Kraft, T.; Riedel, H.; Finite element modelling of PM surface densification process; Powder Metallurgy. 51 (2008) 211-216 Link
Cocks, A.C.F.; Gethin, D.T.; Häggblad, H.Å.; Kraft, T.; Coube, O.; Compaction Models; in: Modelling of Powder Die Compaction, Series: Engineering Materials and Processes, P.R. Brewin, O. Coube, P. Doremus, J.H. Tweed (Eds.); Springer, London (2007) 43-64
Henrich, B.; Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.; Simulations on the influence of rearrangement during sintering; Acta Materialia 55/2 (2007) 753-762 Link
Wonisch, A.; Guillon, O. Kraft, T.; Moseler, M.; Riedel, H.; Rödel, J.; Stress-induced anisotropic behavior of sintering alumina: Discrete element modelling and experiments; Acta Materialia 55/15 (2007) 5187-5199 Link
Kraft, T.; Riedel, H.; Assessment of fatigue lifetime of PM-parts; World Congress on Powder Metallurgy 2004, Vol. 3, EPMA, Shrewsbury, U.K. (2004) 111-116 Link
Kraft, T.; Riedel, H.; Numerical simulation of solid state sintering – Model and application; Journal of the European Ceramic Society 24/2 (2004) 345-361 Link
Reiterer, M.; Kraft,T.; Janosovits, U.; Riedel, H.; Finite element simulation of cold isostatic pressing and sintering of SiC components; Ceramics International 30/2 (2004) 177-183 Link
Reiterer, M.; Kraft, T.; Riedel, H.; Application of a microstructure-based model for sintering and creep; in: Characterization and Modeling to Control Sintered Ceramic Microstructures and Properties, Ceram. Trans. 157 (2004) 49-58 Link
Reiterer, M.; Kraft, T.; Riedel, H.; Manufacturing of a gear wheel made from reaction bonded alumina - numerical simulation of the sinterforming process; Journal of the European Ceramic Society 24 (2004) 239-246 Link
Kraft, T.; Optimizing press tool shapes by numerical simulation of compaction and sintering – application to a hard metal cutting insert; Modelling and simulation in materials science engineering 11/3 (2003) 381-400 Link
Kraft, T.;Riedel, H.; Rosenfelder, O.; Compaction and sintering of a ceramic seal: Modeling and experimental response; Int. J. Powder Metall 39/6 (2003) 27-34 Link
Kraft, T.; Riedel, H.; Numerical simulation of die compaction and sintering; Powder Metall 45/3 (2002) 227-232 Link
Kraft, T.; Riedel, H.; Raether, F.; Becker, F.; Simulation des Brennprozesses bei der Herstellung von Gebrauchskeramiken; Keramische Zeitschrift 54 (2002) 374-381
Coube, O.; Riedel, H.; Numerical simulation of metal powder die compaction with special consideration of cracking; Powder Metallurgy 43/2 (2000) 123-131
Fraunhofer Institute for Mechanics of Materials IWM