Contributions to newspapers, books and conferences as well as dissertations and project reports

Publications: Structural Integrity and Fracture Mechanics

Publications

 

2017-2018

Farajian, M.; Schubnell, J.; Luke, M.; Surface Engineering - Lebensdauerverlängerung metallischer Komponenten durch mechanische Oberflächenbehandlung; Wt Werkstatttechnik online 107/1-2 (2017) 94-95 Link

Filippini, M.; Luke, M.; Varfolomeev, I.; Regazzi, D.; Beretta, S.; Fatigue strength assessment of railway axles considering small-scale tests and damage calculations; Procedia Structural Integrity 4 (2017) 11-18 Link

Tlatlik, J.; Siegele, D.; Cleavage fracture assessment of transient thermo-mechanical loading situations by local approach; Engineering Fracture Mechanics 178 (2017) 512-526 Link

Varfolomeev, I.; Moroz, S.; Siegele, D.; Kadau, K.; Amann, C., Study on fatigue crack initiation and propagation from forging defects, Procedia Structural Integrity 7 (2017) 359-367 Link

to top

2013-2016

Dittmann, F.; Varfolomeev, I., Comparison of analytical methods for the consideration of thermal stresses in the engineering failure assessment, Procedia Structural Integrity 2 (2016) 2974-2981Link

Gänser, H.-P.; Maierhofer, J.; Tichy, R.; Zivkovic, I.; Pippan, R.; Luke, M.; Varfolomeev, I.; Damage tolerance of railway axles - the issue of transferability revisited; International Journal of Fatigue 86 (2016) 52-57 Link

Luke, M.; Burdack, M.; Moroz, S.; Varfolomeev, I.; Experimental and numerical study on crack initiation under fretting fatigue loading; International Journal of Fatigue 86 (2016) 24-33 Link

Traupe, M.; Jenne, S.; Lütkepohl, K.; Varfolomeev, I.; Experimental validation of inspection intervals for railway axles accompanying the engineering process; International Journal of Fatigue 86 (2016) 44-51 Link

Varfolomeev, I.; Dittmann, F., Examination of methods for the treatment of constraint effects within the FAD approach, Procedia Structural Integrity 2 (2016) 761-768 Link

Varfolomeev, I.; Luke, M.; Consideration of fatigue crack growth aspects in the design and assessment of railway axles; Recent Trends in Fracture and Damage Mechanics; Hütter, G.; Zybell, L. (Hrsg.); Springer International Publishing AG, Cham, Schweiz (2016) 103-124 Link

Siegele, D.; Varfolomeev, I.; Moroz, S.; Schlesinger, M.; Riedel, H.; Hettkamp, D.; Jost, A.-R.; Investigation on crack propagation behavior in welded waterwall tubes; in Proc. of 39th MPA-Seminar: Plant Monitoring and Availability-Component Calculation and Materials Utilisation; Materialprüfungsanstalt Universität Stuttgart (2013) 12 Seiten Link

to top

2011-2012 

Hardenacke, V.; Hohe, J.; Friedmann, V.; Siegele, D.; Enhancement of the micro mechanical basis for local approach cleavage models; in Proc. of PAMM 12/1 Special Issue: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics GAMM (2012) 143-144 Link

Hardenacke, V.; Hohe, J.; Friedmann, V.; Siegele, D.; An enhanced local approach model for the assessment of brittle fracture based on micromechanical investigations; Key Engineering Materials 465 (2011) 539-542 Link

Hohe, J.; Luckow, S.; Hardenacke, V.; Sguaizer, Y.; Siegele, D.; Enhanced fracture assessment under biaxial external loads using small scale cruciform bending specimens; Engineering Fracture Mechanics 78/9 (2011) 1876-1894 Link

Luke, M.; Varfolomeev, I.; Lütkepohl, K.; Esderts, A.; Fatigue crack growth in railway axles: assessment concept and validation tests; Engineering Fracture Mechanics 78/5 (2011) 714-730 Link

Madia, M.; Beretta, S.; Schödel, M.; Zerbst, U.; Luke, M.; Varfolomeev, I.; Stress intensity factor solutions for cracks in railway axles; Engineering Fracture Mechanics 78/5 (2011) 764-792 Link

Siegele, D.; Varfolomeev, I.; Hohe, J.; Hardenacke, V.; Nagel, G.; Brittle failure assessment of RPV considering loss of constraint from transient LOCA conditions; in Proc. of International Symposium Fontevraud 7 - Contribution of materials investigations to improve the safety and performance of LWRs; Pradel, P.; Dubuisson, P. (Eds.); French Nuclear Energy Society SFEN, Paris, France (2011) 9 Seiten Link

Varfolomeev, I.; Ivanov, D.; Siegele, D.; A critical evaluation of methods for computing small failure probabilities for ductile piping components; in Proc. of American Society of Mechanical Engineers (ASME) Pressure Vessels and Piping Conference; Vol. 1: Codes and Standards; American Society of Mechanical Engineers (ASME), New York, NY, USA (2011) 561-568 Link

Varfolomeev, I.; Luke, M.; Burdack, M.; Effect of specimen geometry on fatigue crack growth rates for the railway axle material EA4T; Engineering Fracture Mechanics 78/5 (2011) 742-753 Link

Varfolomeev, I.; Mayinger, W.; Consideration of thermally induced bending load in failure assessment of piping components; in Proc. of American Society of Mechanical Engineers (ASME) Pressure Vessels and Piping Conference 2011; Vol. 3: Design and analysis; American Society of Mechanical Engineers (ASME), New York, NY, USA (2011) 603-608 Link

to top

2010 

Hardenacke, V.; Hohe, J.; Luckow, S.; Siegele, D.; An enhanced model for probabilistic cleavage fracture assessment considering local constraint effects; PAMM 10/1 Special Issue: 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics GAMM (2010) 115-116 Link

Hohe, J.; Hardenacke, V.; Luckow, S.; Siegele, D.; An enhanced probabilistic model for cleavage fracture assessment accounting for local constraint effects; Engineering Fracture Mechanics 77/18 (2010) 3573-3591 Link

Luke, M.; Varfolomeev, I.; Lütkepohl, K.; Esderts, A.; Fracture mechanics assessment of railway axles: Experimental characterization and computation; Engineering Failure Analysis 17/3 (2010) 617-623 Link

Pyttel, B.; Varfolomeev, I.; Siegele, D.; Berger, C.; FKM-guideline fracture mechancis proof of strength for engineering components – procedures, compendiums, examples; in Proc. of 18th European Conference on Fracture; Klingbeil, D. (Hrsg.); Deutscher Verband für Materialforschung und -prüfung e.V., Berlin (2010) Paper 77, 8 Seiten Link

Siegele, D.; Varfolomeev, I.; Hohe, J.; Hardenacke, V.; Integrity assessment of a German PWR RPV considering loss of constraint; in Proc. of American Society of Mechanical Engineers ASME Pressure Vessels and Piping Division Conference 2010; Vol. 6/Part A; Wiersma, B.J. (Ed); American Society of Mechanical Engineers ASME, New York, NY, USA (2010) 153-160 Link

Siegele, D.; Varfolomeev, I.; Ivanov, D.; Probabilistic failure assessment of nuclear piping components; in Proc. of 36th MPA-Seminar 2010; Roos, E. (Hrsg.); Staatliche Materialprüfungsanstalt, Stuttgart (2010) 524-540 Link

Varfolomeev, I.; Luke, M.; Moroz, S.; Experimental and numerical investigations of fatigue crack growth in various specimen geometries; Procedia Engineering 2/1 (2010) 1829-1837 Link

to top

2007-2009 

Luke, M.; Varfolomeev, I.; Fracture mechanics assesssment of crack propagation behaviour in railway axles; in Proc. of 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Bracciali, A. (Ed.); Firenze, Italien (2009) 521-525 Link

Luke, M.; Varfolomeev, I.; Lütkepohl, K.; Esderts, A.; Fracture mechanics assessment of crack propagation in railway axle steels under fully reversed variable amplitude loading; in Proc. of 2nd Int. Conference on Material and Component Performance under Variable Amplitude Loading, DVM-Bericht; Darmstadt, Germany (2009) 259-268 Link

Varfolomeev, I.; Beukelmann, D.; Analytical solutions and tools for assessment of surface cracks in cylindrical components; in Proc. of American Society of Mechanical Engineers ASME Pressure Vessels and Piping Division Conference 2008; Vol.7: Operations, applications and component; Gupta, N.K. (Ed.) American Society of Mechanical Engineers ASME, New York, NY, USA (2009) 35-46 Link

Varfolomeev, I.; Luke, M.; Burdack, M.; Fatigue and fretting fatigue behaviour of a railway axle steel A4T; in Proc. of 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Bracciali, A. (Ed.); AB Editore, Firenze, Italien (2009) 539-542 Link

Luke, M.; Varfolomeev, I.; Lütkepohl, K.; Esderts, A.; Fracture mechanics assessment of railway axles based on experimental and computational investigations; in Proc. of 17th European Conference on Fracture ECF17, Brno (2008) 1903-1910 Link

Siegele, D.; Varfolomeyev, I.; Nagel, G.; Brittle failure assessment of a PWR-RPV for operating conditions and loss of coolant accident; Journal of Pressure Vessel Technology 130/3 (2008) 03140 1-8 Link

Hohe, J.; Hebel, J.; Friedmann, V.; Siegele, D.; Probabilistic failure assessment of ferritic steels using the master curve approach including constraint effects; Engineering Fracture Mechanics 74/8 (2007) 1274-1292 Link

to top