Contributions to newspapers, books and conferences as well as dissertations and project reports

Publications: Meso- and Micromechanics

Publications

2012-2016

Beckmann, C.; Farajian, M.; Hohe, J.; Kennerknecht, T.; Luke, M.; Preußner, J.; Numerische und experimentelle Untersuchung der Rissinitiierungsphase in der Wärmeeinflusszone von Schweißverbindungen; in Tagungsband 48. Tagung des DVM Arbeitskreises Bruchmechanik und Bauteilsicherheit: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen; Hübner, P. (Hrsg.); Deutscher Verband für Materialforschung und -prüfung e.V., Berlin (2016) 225-234 Link

Fliegener, S.; Kennerknecht, T.; Kabel, M.; Simulation of the damage mechanisms of glass fiber reinforced polypropylene based on micro specimens and 1:1 models of their microstructure; in Proc. of 17th European Conference on Composite Materials - ECCM17; ESCM -European Society for Composite Materials (Ed.); ESCM -European Society for Composite Materials, Sevilla, Spanien (2016) 8 Seiten Link

Li, X.; Dao, M.; Eberl, C.; Hodge, A.M.; Fracture, fatigue, and creep of nanotwinned metals; MRS Bulletin 41/4 (2016) 298-304 Link

Slaby, S.A.; Kraft, O.; Eberl, C.; Fatigue properties of conventionally manufactured and micro-powder-injection-moulded 17-4PH micro-components; Fatigue and Fracture of Engineering Materials and Structures, 39/6 (2016) 780-789 Link

Senn, M.; Christensen, S.; Kalidindi, S.; Luo, A.; Madison, J.; Raabe, D.; Sun, X.; An integrated surrogate modeling approach for materials and approach for materials and process design; in Proc. of 3rd World Congress on Integrated Computational Materials Engineering ICME 2015; Poole, W.; Christensen, S.; Kalidindi, S.; Luo, A.; Madison, J.; Raabe, D.; Sun, X. (Eds.) John Wiley & Sons Inc., Hoboken, NJ, USA (2015) 331-338 Link

Senn, M.; Schweizer, F.; Pfeiffer, W.; Universal concept for the optimization of step sizes in manufacturing processes; Procedia CIRP; in Proc. of 15th CIRP Conference on Modelling of Machining Operations 31 (2015) 53-57 Link

Straub, T.; Berwind, M.F.; Kennerknecht, T.; Lapusta, Y.; Eberl, C.; Small-scale multiaxial setup for damage detection into the very high cycle fatigue regime; Experimental Mechanics 55/7 (2015) 1285-1299 Link

Briot, N. J.; Kennerknecht, T.; Eberl, C.; Mechanical properties of bulk single crystalline nanoporous gold investigated by millimetre-scale tension and compression testing; Philosophical Magazine 94/8 (2014) 847-866 Link

Knetsch, D.; Funk, M.; Kennerknecht, T.; Eberl, C.; Load data calculation in electric axle drives and fatigue assessment for the electric motor subsystem; Materials Testing 56/7-8 (2014) 535-541 Link

Sebastiani, M.; Eberl, C.; Bemporad, E.; Korsunsky, A.M.; Nix, W.D.; Carassiti, F.; Focused ion beam four-slot milling for poisson's ratio and residual stress evaluation at the micron scale; Surface and Coatings Technology 251 (2014) 151-161 Link

Sebastiani, M.; Korsunsky, A.M.; Eberl, C.; Bemporad, E.; Pharr, G. M.; Discussion on: Interfacial residual stress analysis of thermal spray coatings by miniature rind-core cutting combined with DIC method - by Zhu et al.; Experimental Mechanics 54/7 (2014) 1305-1306 Link

Ulas, S.; Bundschuh, S.; Jester, S.-S.; Eberl, C.; Kraft, O.; Hölscher, H.; Böttcher, A.; Kappes, M.M.; Mechanical properties of C58 materials and their dependence on thermal treatment; Carbon 68 (2014) 125-137 Link

Yoo, B.-G.; Boles, S.T.; Liu, Y.; Zhang, X.; Schwaiger, R.; Eberl, C.; Kraft, O.; Quantitative damage and detwinning analysis of nanotwinned copper foil under cyclic loading; Acta Materialia 81 (2014) 184-193 Link

Hoepfel, H.; Pfeiffer, W.; Shaping of ceramics using residual stresses; Materials Science Forum 768-769, Proc. of 9th International Conference on Residual Stresses ICRS9; Kurz, S.J.B. ; Mittemeijer, E.J.; Scholtes, B. (Eds.); Trans Tech Publications, Durnten-Zürich, Schweiz (2013) 478-483 Link

Pinneker, V.; Eberl, C.; Sozinov, A.; Ezer, Y.; Kohl, M.; Magnetic field-induced local strain bands in single crystalline Ni-Mn-Ga foils; Journal of Alloys and Compounds 577/1 (2013) 358-361 Link

Senn, M.; Link, N.; Gumbsch, P.; Optimal process control through feature-based state tracking along process chains; in Proc. of 2nd World Congress on Integrated Computational Materials Engineering ICME; Li, M.; Campbell, C.; Thoruton, K.; Holm, E.; Gumbsch, P. (Eds.); John Wiley & Sons Inc., Hoboken, NJ, USA (2013) 69-74 Link

Straub, T.; Theillet, P.-O.; Eberl, C.; Pierron, O.N.; Comparison of the stress distribution and fatigue behavior of 10- and 25-μm-thick deep-reactive ion-etched Si kilohertz resonators; Journal of Microelectromechanical Systems 22/2 (2013) 418-429

Zhao, S.; Gan, Y.; Kamlah, M.; Kennerknecht, T.; Rolli, R.; Influence of plate material on the contact strength of Li4OSi4 pebbles in crush tests and evaluation of the contact strength in pebble-pebble contact; Engineering Fracture Mechanics 100 (2013) 28-37 Link

Bückmann, T.; Stenger, N.; Kadic, M.; Kaschke, J.; Frölich, A.; Kennerknecht, T.; Eberl, C.; Thiel, M.; Wegener, M.; Tailored 3D mechanical metamaterials made by dip-in direct-laser-writing optical lithography; Advanced Materials 24/20 (2012) 2710

Eberl, C.; Courty, D.; Walcker, A.; Kraft, O.; Stress-gradient induced fatigue at ultra high frequencies in sub micron thin metal films; International Journal of Materials Science 01 (2012) 80

Straub, T.; Baumert, E.K.; Eberl, C.; Pierron, O.N.; A method for probing the effects of conformal nanoscale coatings on fatigue crack initiation in electroplated Ni films; Thin Solid Films 526 (2012) 176–182

2009-2011

Burger, S.; Eberl, C.; Siegel, A.; Ludwig, A.; Kraft, O.; A novel high-throughput fatigue testing method for metallic thin Films; Sci. Technol. Adv. Mater., 12, 054202 (2011)

Burger, S.; Rupp, B.; Ludwig, A.; Kraft, O.; Eberl, C.; Fatigue testing of thin films; Key Eng. Mat., 465, (2011) 552

Eberl, C.; Gianola, D. S.; Wang, X.; He, M. Y.; Evans, A. G.; Hemker, K. J.; A method for in situ measurement of the elastic behavior of a columnar thermal barrier coating; Acta Materialia, 59, 9, 3612-3620

Eberl, C.; Wang, X.; Gianola, D. S.; He, M. Y.; Evans, A. G.; Hemker, K. J.; In situ measurement of the toughness of the interface between a thermal barrier coating and a Ni alloy; J. Am. Cer. Soc., 94, Issue Supplement s1, pages s120–s127

Funk, M.; Eberl, C.; Investigations on the fatigue behavior of nanocrystalline metals; Key Eng. Mat., 465, (2011) 207

Funk, M.; Ma, K.; Eberl, C.; Schoenung, J. M.; Göken, M.; Hemker, K. J.; High Temperature mechanical behavior of end-of-life cryomilled NiCrAlY bond coat materials; Met. Trans. A., Volume 42, Number 8, 2233-2241

Prokop, J.; Eberl, C.; Funk, M.; Prüfe, P.; Lorenz, J.; Piotter, V.; Welz, M.; Ritzhaupt-Kleissl, H.-J.; Mechanical testing of micro samples produced by a novel LIGA related process chain; Mic. Syst. Tech., 17, 2, 281

Sebastiani, M.; Bemporad, E.; Eberl, C.; Pharr, G. M.; Depth-resolved residual stress analysis of thin coatings by a new FIB-DIC method; Mat. Sci. Eng. A, 528 (2011)

Senger, J.; Weygand, D.; Motz, C.; Gumbsch, P.; Kraft, O.; Aspect ratio and stochastic effects in the plasticity of uniformly loaded micrometer-sized specimens; Acta Materialia 59 (2011) 2937-2947 Link

Eberl, C.; Gianola, D. S.; Hemker, K. J.; Mechanical characterization of coatings using microbeam bending and digital image correlation techniques; Exp. Mech., 50, 1 (2010)

Eberl, C.; Riesch-Oppermann, H.; Spolenak, R.; Kubat, F.; Ruile, W.; Courty, D.; Kraft, O.; In situ observations and quantitative analysis of short circuit probability due to ultra high frequency fatigue; IEEE Trans. Dev. Mat. Rel., PP, 99 (2010)

Eberl, C.; Saif, T.; In situ mechanical testing of biological and/or inorganic materials at the microscale and -/nanoscale; Guest Ed., MRS Bullettin, 35, 5 347-350 (2010)

Balk, T. J.; Eberl, C.; Sun, Y.; Hemker, K. J.; Gianola, D. S.; Tensile and compressive microspecimen testing of bulk nanoporous gold; JOM, 24-30, Dec (2009)

Gianola, D. S.; Eberl, C.; Micro- and nanoscale tensile testing of materials; invited overview for JOM, 24-35, March (2009)

Joshi, S. P.; Eberl, C.; Cao, B. Y.; Ramesh, K. T.; Hemker, K. J.; On the occurrence of Portevin – Le Châtelier instabilities in ultrafine-grained 5083 aluminum alloys; Exp. Mech., 49, 2 207-218 (2009)

to top

2005-2008

Gianola, D. S.; Eberl, C.; Cheng, X. M.; Hemker, K. J.; Stress-driven surface topography evolution in nanocrystalline Al thin films; Adv. Mat., 20, 2 (2008)

Hemker, K. J.; Mendis, B. G.; Eberl, C.; Characterizing the microstructure and mechanical behavior of two-phase NiCoCrAlY bond coat for thermal barrier systems; Mat. Sci. Eng. A, 483-484 (2008)

Lewis, A. C.; Eberl, C.; Hemker, K. J.; Weihs, T. P.; Grain boundary strengthening in copper/niobium multilayered foils as a function of temperature and strain rate; JMR, 23, 2 (2008)

Lewis, A. C.; van Heerden, D.; Eberl, C.; Hemker, K. J.; Weihs, T. P.; Deformation mechanisms in fine-grained niobium; Acta Mat., 56, 13 (2008)

Lohmiller, J.; Eberl, C.; Kraft, O.; Balk, T. J.; Mechanical spectroscopy of nanocrystalline nickel near room temperature; Scripta Mat., 59, 4 (2008)

Eberl, C.; Spolenak, R.; Kraft, O.; Ruile, W.; Arzt, E.; Fatigue damage in thin film Al interconnects at ultra high frequency: a Finite Element Analysis approach; TSF, 515, 6 (2007)

Sharpe Jr., W. N.; Pulskamp, J.; Gianola, D. G.; Eberl, C.; Polcawich, R. G.; Thompson, R. J.; Strain measurement of silicon dioxide microspecimens by digital image processing; Exp. Mech., 47, 5 (2007)

Eberl, C.; Spolenak, R.; Arzt, E.; Kubat, F.; Leidl, A.; Ruile, W.; Kraft, O.; Ultra high-cycle fatigue in pure Al thin films and line structures; Mat. Sci. and Eng. A, 421 (2006)

Eberl, C.; Spolenak, R.; Kraft, O.; Kubat, F.; Ruile, W.; Arzt, E.; Fatigue at ultra high frequencies in Al thin films; J. Appl. Phys., 99, 11 (2006)

Kubat, F.; Ruile, W.; Eberl, C.; Hesjedal, T.; Reindl, L. M.; Qualitative and quantitative analysis of acoustomigration effects in SAW-devices; Micro Elec. Eng., 82 (2005)

Orso, S.; Wegst, U. G. K.; Eberl, C.; Arzt, E.; Micrometer scale tensile testing of biological attachment devices; Adv. Mat., 18 (2005)

Spolenak, R.; Sauter, L.; Eberl, C.; Reversible orientation – biased grain growth in thin metal films induced by a focused ion beam; Scripta Mat., 53 (2005)

to top